Supply | Extract | |
Airflow: | l/s | l/s |
Duct pressure: |
Pa | Pa |
Place:
Design temperature: | °C |
Exhaust air temperature limit: | °C |
Supply air target temperature : | °C |
Extract air temperature: | °C |
Handler: | |
Date: | |
Target: | |
Name: | |
Street address: | |
Postcode: | |
Post office: | |
Project: | |
Positio: | |
Additional information: |
Results at the calculation point : | Supply: | Extract: |
Fan speed: | 45 % | 43 % |
Air flow: | 40 l/s | 40 l/s |
Total pressure: | 37 Pa | 43 Pa |
Air speed: | 3.3 m/s | 3.26 m/s |
Input power: | 17 W | 16 W |
Annual fan energy consumption | 289 kWh | |
SFP value: | 0.82 kW/(m³/s) |
Plate heat exchanger: | Supply: | Extract: |
Pressure drop: | 36 Pa | 36 Pa |
Efficiency with equal airflows: | 84.4 % | |
Supply air temperature after the heat exhanger | 13.7 °C | |
Postheating demand at the calculation point: | 113 W | |
Off | ||
On | ||
Temperature after preheating: | - | |
Preheating power: | - |
DIVK sound values at the calculation point | Lw | LwA |
Supply air duct: | 60.0 dB | 51.9 dB(A) |
Extract air duct: | 52.6 dB | 31.6 dB(A) |
Soundpressure level in the room (10m² absorbtion LpA) |
24.0 dB(A) |
SPL-levels by the octavebands | ||||||||||
63 | 125 | 250 | 500 | 1k | 2k | 4k | 8k | dB | dB(A) | |
Through the casing to the room | 45 | 40 | 35 | 21 | 19 | 12 | 9 | 0 | 53.3 | 28.0 |
Supply | 56 | 55 | 46 | 47 | 47 | 47 | 41 | 31 | 60.0 | 51.9 |
Extract | 35 | 43 | 37 | 26 | 29 | 20 | 13 | 2 | 52.6 | 31.6 |
* The sound level of the measurement does not exceed the background noise level |
Calculation of annual efficiency: | ||
Exhaust air temperature: | -18.7 °C | |
Exhaust air temperature limit | 0 °C | |
Air flow ratio supply / extract | 1.00 | |
Amount of energy required for ventilation: | 6351 kWh | |
Achieved energy saving: | 4940 kWh | |
Total energy consumption for ventilation | 1411 kWh | |
HRV annual efficiency: | 77.8 % |